The dual iris lets XGIMI adjust light on the fly, so blacks stay deep
In the quiet evolution of home cinema, XGIMI has stepped forward with its TITAN Noir projector series — a three-model lineup born from years of laser projection refinement and first glimpsed at CES 2026. The flagship Max model, capable of casting 7,000 lumens across a 300-inch canvas with a dual iris system designed to honor shadow and light alike, speaks to a growing audience that believes the living room deserves the same intentionality as the theater. Pre-orders are open now, with a Kickstarter campaign set for April 23, inviting early believers to claim their place in this next chapter of domestic spectacle.
- The home theater market's appetite for cinema-grade image quality is pushing XGIMI to engineer a dual iris system that gives the TITAN Noir Max genuine control over black levels — a problem that has quietly undermined projector credibility for years.
- A reworked DLP chip architecture addresses the persistent frustration of brightness degradation under sustained use, signaling that XGIMI is engineering for endurance, not just spec-sheet glory.
- With 240Hz refresh rates and IMAX Enhanced support across all three models, the TITAN Noir series is openly courting both cinephiles and gamers — two audiences that rarely share the same hardware.
- A $50 deposit unlocks access to up to $3,200 in early-bird discounts when the Kickstarter campaign launches April 23, though the final retail pricing structure remains anchored to that crowdfunding scaffolding.
- XGIMI is betting that the combination of triple-laser color accuracy, massive projection capability, and a staged crowdfunding rollout will resonate with a home theater audience that has grown far more discerning.
XGIMI has opened pre-orders for its TITAN Noir projector series, a three-model lineup first unveiled at CES 2026, with a Kickstarter campaign set to follow on April 23. A $50 deposit secures early access and locks in potential discounts of up to $3,200 for buyers willing to commit ahead of the full launch.
The flagship TITAN Noir Max leads the series with 7,000 ISO lumens and a 10,000:1 native contrast ratio. Its most notable engineering addition is a dual iris system — a dynamic mechanism designed to give the projector finer control over black levels and highlight detail, addressing one of the more persistent weaknesses in projector image quality. The entire lineup also benefits from a reworked DLP chip architecture built around heat management, allowing the projectors to sustain higher brightness over time without the gradual performance drop that has long plagued the category. The RGB triple-laser light source, a hallmark of XGIMI's premium tier, is carried forward for its color accuracy and longevity.
All three models — the base TITAN Noir, the Pro, and the Max — support projection sizes up to 300 inches and include Dolby Vision, HDR10+, and IMAX Enhanced compatibility. XGIMI claims color accuracy within Delta E 0.8 and a color gamut exceeding the BT.2020 standard. Each model runs on an MT9681 chipset with 4GB of RAM and 64GB of storage, and all support a 240Hz refresh rate for gaming use.
The crowdfunding approach reflects a wider trend among premium projector makers — using platforms like Kickstarter to build early demand and reward first adopters with meaningful pricing. For XGIMI, the TITAN Noir series represents the most complete expression yet of its laser projection ambitions, aimed at a home theater audience that increasingly knows exactly what it wants.
XGIMI is taking its most ambitious home theater projector lineup to market, opening pre-orders this week for the TITAN Noir series ahead of a Kickstarter campaign set to launch on April 23. The company first showed the three-model lineup at CES 2026, and now buyers can lock in early access with a $50 deposit that secures up to $3,200 in discounts.
The flagship of the series, the TITAN Noir Max, represents a significant step forward in XGIMI's projector engineering. It delivers up to 7,000 ISO lumens of brightness and claims a 10,000:1 native contrast ratio—numbers that matter for anyone serious about image quality in a darkened room. The real innovation, though, sits in the new dual iris system that XGIMI has engineered into this generation. The dynamic iris setup is designed to improve native contrast by giving the projector finer control over black levels and highlight detail in darker scenes, a meaningful upgrade for cinematic content where shadow detail often gets lost.
Beyond the flagship, XGIMI has reworked the DLP chip architecture across the entire TITAN Noir lineup with a focus on heat management. The goal is straightforward: maintain higher brightness levels more consistently over time without the performance degradation that can plague projectors under sustained use. The company kept the RGB triple-laser light source that defined its previous high-end models, a proven technology for color accuracy and longevity.
All three models in the series—the base TITAN Noir, the Pro, and the Max—support projection sizes up to 300 inches, which is genuinely massive for a home installation. Each one includes Dolby Vision, HDR10+, and IMAX Enhanced content support, the kind of feature set that appeals to viewers who care about how their content is actually meant to look. XGIMI claims color accuracy tight enough to measure under Delta E 0.8, with a color gamut that extends beyond the BT.2020 standard. Every model runs on an MT9681 chipset with 4GB of RAM and 64GB of storage, and all of them support a 240Hz refresh rate—a nod to the growing number of people who want their projectors to handle gaming without stuttering or lag.
The pricing strategy leans on early adoption. A $50 deposit gets buyers into the pre-order pool and locks in access to the Kickstarter campaign when it goes live next month. XGIMI is framing this as a path to up to $3,200 in discounts, though the company's crossed-out pricing tiers on its website are scaffolding for the early-bird offer rather than necessarily final retail prices. Buyers who commit now will receive a link to complete their full pledge once the Kickstarter campaign launches.
The move reflects a broader shift in how premium projector makers are bringing products to market—using crowdfunding platforms and early-access programs to gauge demand and fund production while offering meaningful discounts to the earliest adopters. For XGIMI, the TITAN Noir series represents the culmination of years of work on laser projection technology, and the company is betting that the combination of brightness, contrast control, and gaming-friendly specs will resonate with a market that has grown increasingly sophisticated about home theater.
Notable Quotes
XGIMI reworked its DLP chip architecture with a focus on heat management, aiming to maintain higher brightness more consistently over time.— XGIMI (company statement)
The Hearth Conversation Another angle on the story
Why does the dual iris system matter so much? It sounds like a small engineering detail.
It's actually the difference between a projector that shows you what's on screen and one that shows you what was intended. When you're watching a dark scene—a night sequence, shadows in a room—a projector without fine iris control either crushes all the detail into black or washes it out. The dual iris lets XGIMI adjust light on the fly, so blacks stay deep but you still see what's in them.
And the 7,000 lumens—is that bright enough for a living room with windows?
That's the whole point. Most projectors struggle in rooms with ambient light. Seven thousand lumens is genuinely bright. You could use this in a room that isn't completely blacked out, though you'd still want to manage light for best results. It's flexibility.
Why the 240Hz refresh rate? Projectors aren't usually gaming devices.
They weren't, but that's changing. Gamers with money want immersive experiences on big screens. A 240Hz projector can keep up with fast-moving games without the motion blur that makes gaming on older projectors feel sluggish. It's XGIMI saying: we're not just for movies anymore.
The $50 deposit securing $3,200 in discounts—that feels like a lot of discount. What's the real price?
That's the question everyone asks. XGIMI isn't showing final retail pricing yet. The crossed-out prices on their site are just anchors for the early-bird math. The real price will probably be higher, but early adopters are getting genuine savings. It's a crowdfunding play—they want committed buyers before they commit to full production.
So this is still a bet on demand, not a finished product?
Not entirely. They showed it at CES, so the hardware exists. But Kickstarter lets them validate interest and fund manufacturing at scale. It's lower risk for XGIMI and better pricing for early buyers. Everyone wins if the product delivers.