Stretching Magic-Angle Graphene Produces Giant Swings in Electrical Resistance

A new lever: deforming the atomic lattice itself
Strain joins temperature, voltage and magnetic fields as a way to control magic-angle graphene.
Mark

So what's actually new here? People already tune these twisted graphene devices.

Mimi

They've used temperature, voltage and magnetic fields. This team added strain, stretching the lattice itself using a device that expands and contracts with applied voltage.

Mark

And the response was big?

Mimi

The gauge factor, the resistance change per unit strain, was more than two orders of magnitude above conventional metals. It was also much stronger than in Bernal-stacked bilayer graphene.

Luke

Worth being clear that this is a measured result. The explanation isn't. The authors only discuss nematic fluctuations and fluctuating isospin moments as possible origins.

Mark

What would nematic fluctuations mean here?

Mimi

Roughly, electrons favoring a direction and breaking the lattice's rotational symmetry. The Curie-Weiss-like divergence at low temperature in some doping regimes fits the idea of a system near some ordered state.

Luke

Fits, not proves. And that divergence appears only in some regimes, not everywhere.

Mark

Why does Chu's comparison to high-temperature superconductors matter?

Mimi

Those materials show a similarly giant strain response, so it hints at a shared mechanism.

Luke

A hint is all it is. The source doesn't say what the link would be, and no one has shown it yet.

Mark

What happens next?

Mimi

The team wants a simpler setup so other groups can reproduce it, and then to try other atomically thin materials.

  • Electrons in twisted graphene respond to a tiny physical pull on the lattice with a resistance swing more than a hundredfold stronger than ordinary metals.
  • The effect surges at low temperatures and far outstrips the response of untwisted bilayer graphene, unsettling assumptions about how these layers behave.
  • Researchers are probing whether electrons quietly align their preferred direction, breaking the lattice's symmetry, or whether fluctuating magnetic-like moments drive the surge.
  • The team is streamlining its strain-device setup so other laboratories can reproduce the result and test the same method on other atomically thin materials.

Two graphene sheets twisted to a precise angle have, since 2018, offered a window into how electrons can pair and flow without resistance when cooled near absolute zero. Now a team spanning the University of Washington and Japan's National Institute for Materials Science has found that gently stretching such a device can shift its resistance dramatically, opening a new handle on a material that has so far been steered mainly by temperature, voltage and magnetic field. Why the electrons respond so strongly remains an open question, but the response echoes behavior seen in some of the most puzzling materials physics has encountered, suggesting that a shared thread may run beneath them all.

Stack two sheets of graphene, twist them by about 1.1 degrees, and chill them near absolute zero, and they can become superconducting. This so-called magic angle was first reported in 2018, and it has become one of the most closely watched corners of materials physics. A team at the University of Washington and Japan's National Institute for Materials Science has now shown that stretching such a device changes its electrical resistance enormously.

The researchers mounted their flakes on a device that expands and contracts with applied voltage, letting them tune a pull along one direction on the atomic lattice smoothly rather than in fixed steps. Near the magic angle, the resistance shifted sharply with that strain. Its size depended on how many electrons filled the material and on temperature, and it grew as things got colder. The gauge factor, a measure of relative resistance change per unit strain, came out more than two orders of magnitude larger than in conventional metals, and far stronger than in ordinary untwisted bilayer graphene.

The authors are careful not to claim a final explanation. They weigh two possibilities: electrons favoring a direction and breaking the lattice's rotational symmetry, or enhanced electronic entropy from fluctuating isospin moments. Senior author Matthew Yankowitz described strain as a fundamentally new way to manipulate these materials by deforming the very lattice they live on. His colleague Jiun-Haw Chu noted that similarly giant strain responses appear in other exotic materials, including high-temperature superconductors, hinting at a shared underlying mechanism.

The next step is practical. The team wants a simpler setup that others can replicate, and then a broader test across atomically thin materials.

Two sheets of graphene, stacked and twisted against each other by about 1.1 degrees, then cooled to near absolute zero, can become superconducting. That is the "magic angle" result first reported in 2018, and a team at the University of Washington and Japan's National Institute for Materials Science has now shown that physically stretching such a device changes its electrical resistance enormously.

The researchers mounted their graphene flakes on a device that expands and contracts when voltage is applied to it. That let them dial in uniaxial strain, a pull along one direction, on the atomic lattice continuously rather than in fixed steps. The image released with the work shows why this matters: the moiré pattern formed by the two twisted layers looks different when the lattice is strained than when it is not.

Near the magic angle, the devices showed a pronounced elastoresistance, meaning their resistance shifted with strain. The size of that response depended on band filling, essentially how many electrons are in the material, and on temperature. The measure used is the gauge factor, the relative change in resistance per unit of strain. In these devices it came out more than two orders of magnitude larger than in conventional metals.

The effect was also much stronger than in Bernal-stacked bilayer graphene, the ordinary arrangement of two graphene layers without the twist, and it grew as temperatures fell. In some doping regimes the response showed a Curie-Weiss-like divergence with temperature, a pattern that tends to signal a system leaning toward some kind of ordered state.

The authors do not claim to have settled what causes the response. They discuss two possible origins: nematic fluctuations, in which the electrons favor a direction and break the lattice's rotational symmetry, and enhanced electronic entropy from fluctuating isospin moments.

The work lands in a field that has spent years learning to steer moiré materials. Since 2018, researchers have used temperature, voltage and magnetic fields to switch them among metallic, insulating and superconducting states. Efforts to understand the electron pairing behind the superconductivity continue as well; one study from Manchester suppressed it by screening interactions between electrons. Strain is a different kind of lever.

"We've now added a fundamentally new way to manipulate them, by directly deforming the atomic lattice they live on," said senior author Matthew Yankowitz of the University of Washington. His colleague Jiun-Haw Chu pointed out that a similarly giant response to strain appears in other exotic materials, including high-temperature superconductors, which hints at a common link between them.

The team's next step is practical. They want to simplify the experiment so other groups can reproduce it, and then extend the approach to other atomically thin materials.

We've now added a fundamentally new way to manipulate them, by directly deforming the atomic lattice they live on.
— Matthew Yankowitz, University of Washington
A similarly giant response to strain also appears in other exotic materials, including high-temperature superconductors, hinting at a common link.
— Jiun-Haw Chu (paraphrased)
Contattaci Domande frequenti