In mid-November, word surfaced through equipment makers that SK Hynix was pressing suppliers for bonding, dicing and testing machines for its next-generation HBM4 memory, some wanted within the first quarter. The aim is to convert idle space at its Cheongju plant into full production by mid-next-year, at a moment when the company's orders are nearly sold out through 2029. Yet the same surge of expansion is spreading across Samsung and Micron, and a human pattern long familiar from other booms appears: when many hands build at once, the question shifts from whether the demand exists to whether
SK Hynix Moves HBM4 Expansion Into Execution as Equipment Talks Advance Toward First-Half Mass Production
The key variable has shifted from demand to supply-side execution.
Why does a story about equipment purchasing matter?
Because it shows the plan becoming real. SK Hynix is negotiating for bonding, dicing and testing tools, and some are wanted within the first quarter.
What's the capacity at stake?
Industry sources estimate more than 20,000 extra HBM wafers a month at Cheongju P&T6 once the lines hit full production.
Worth flagging that's an industry estimate, not an SK Hynix figure. The same goes for the Samsung and Micron numbers.
But the company did say something firm about demand, right?
On its October earnings call it said DRAM and HBM orders through 2029 are almost entirely sold out. That's why it's pressing suppliers on delivery.
Sold out is the company's characterization. The reporting doesn't give order volumes or prices, so we can't verify how much is locked in.
And the price forecasts?
TrendForce expects blended HBM prices up 122% in 2027 to $3.7 per Gb, and industry revenue above $200 billion.
That's one research firm's forecast, relayed through Goldman Sachs. It's a projection, not an outcome.
So what's the real risk?
Three makers adding capacity at once usually pressures prices, though HBM4 qualification may slow effective supply.
Right, and nobody yet knows which effect wins. The first-half ramps will tell us.
Der Puls
- SK Hynix is racing to lock in back-end equipment for HBM4, with some deliveries pulled forward into the first quarter, a pace the market did not expect.
- Its orders through 2029 are almost entirely sold out, so every week of delay at the Cheongju P&T6 fab is pressure felt by customers and suppliers alike.
- Samsung and Micron are expanding HBM capacity at the same time, raising the risk that a flood of supply collides with a wave of rising prices.
- The outcome hinges on whether equipment arrives on schedule and whether the lines ramp in the first half of next year, a test that will tell whether the boom turns into shipments or a glut.
In mid-November, word surfaced through equipment makers that SK Hynix was pressing suppliers for bonding, dicing and testing machines for its next-generation HBM4 memory, some wanted within the first quarter. The aim is to convert idle space at its Cheongju plant into full production by mid-next-year, at a moment when the company's orders are nearly sold out through 2029. Yet the same surge of expansion is spreading across Samsung and Micron, and a human pattern long familiar from other booms appears: when many hands build at once, the question shifts from whether the demand exists to whether the making can keep pace with it, and whether the price that rewards it will hold.
On November 15, several semiconductor equipment makers told South Korean media that SK Hynix had entered talks over the timing and volume of purchases for HBM4, its next generation of high-bandwidth memory. The focus is on the back-end steps of bonding, dicing and testing, and some machines have been requested for delivery within the first quarter, faster than the market had expected.
The plan is to install the equipment and reach full production at the Cheongju P&T6 fab by the first half of next year, turning as much of the site's idle space into HBM4 lines as possible. Industry sources estimate that at full output the company could add more than 20,000 HBM wafers a month, though that is an outside estimate rather than a company figure.
The urgency comes from SK Hynix's October earnings call, where it said its DRAM and HBM orders through 2029 were almost entirely sold out. Equipment makers say the interest across the industry is considerable, and that the broader ripple effects of HBM growth are only now starting to appear.
SK Hynix is not alone. Samsung expects its HBM4-series output to at least double next year, and Micron plans to double its HBM capacity from last year. Price forecasts are rising as well: TrendForce projects blended HBM prices up 122% in 2027, and industry revenue above $200 billion.
The central question now is execution. Whether equipment arrives on time and the Cheongju lines ramp smoothly will decide whether sold-out orders become real shipments. Whether this wave of expansion eventually pushes prices down or holds them up will depend on how quickly each maker's lines come online next year.
On Nov. 15, several semiconductor equipment makers told South Korean media that SK Hynix is now negotiating with them over the timing and volume of equipment purchases for HBM4, its next generation of high-bandwidth memory. The talks center on back-end process steps: bonding, dicing and testing. Some of the equipment has been requested for delivery within the first quarter, a pace the market had not expected.
The goal, according to the reports, is to finish introducing and installing the equipment and reach full production in the first half of next year. The new capacity is destined for SK Hynix's Cheongju P&T6 fab, where the company has been building HBM production lines since early this year. It now plans to convert as much of the fab's idle space as it can into HBM4 capacity. Industry sources estimate that once the relevant lines reach full production, the company could add more than 20,000 HBM wafers per month. That figure is an industry estimate, not a company number.
The urgency traces to what SK Hynix said on its third-quarter earnings call in October: its DRAM and HBM orders for the next three years, through 2029, are almost entirely sold out. That statement underpins the extra equipment spending and explains why the company is pressing suppliers on delivery dates. An executive at a back-end equipment company said SK Hynix is preparing for large-scale orders, that this has drawn considerable interest across the industry, and that the ripple effects of HBM market growth are expected to truly begin to show.
SK Hynix is not expanding alone. Samsung Electronics expects output of its HBM4-series products, including HBM4 and HBM4E, to rise at least twofold next year from this year. Industry estimates put Samsung's average monthly wafer input for HBM at about 180,000 wafers this year, rising to about 250,000 next year, an increase of nearly 40%. Micron Technology plans to double its HBM capacity from last year. The Samsung and Micron figures come from industry media and industry estimates.
Price forecasts are climbing too. Goldman Sachs, citing a memory industry expert meeting it held with market research firm TrendForce, noted that HBM prices are expected to rise more sharply in 2027. TrendForce's own forecast is more specific: blended HBM average selling prices will rise 122% year-on-year in 2027 to $3.7 per Gb, and global HBM industry revenue will grow more than 230% to top $200 billion. If that holds, HBM would move from a profit supplement for memory makers to the product that dominates the industry's revenue structure.
For SK Hynix, the key variable has shifted from demand to supply-side execution. Whether equipment arrives on schedule, and whether the Cheongju lines ramp smoothly in the first half of next year, will determine whether locked-in orders become actual shipments. For equipment suppliers, order growth in bonding, dicing and testing could be the main source of earnings leverage in coming quarters.
Over a longer cycle, there is tension between three manufacturers expanding at once and forecasts of sharply higher prices. Concentrated capacity releases typically weigh on prices, while the technical barriers and qualification cycles of the HBM4 generation may delay the formation of effective supply. Which force prevails will depend on how fast each maker's lines actually ramp in the first half of next year.
Bemerkenswerte Zitate
DRAM and HBM orders for the next three years are almost entirely sold out.— SK Hynix, third-quarter earnings call, October
SK Hynix is preparing for large-scale orders, and the ripple effects of HBM market growth are expected to truly begin to show.— Executive at a back-end equipment company (paraphrased)