In a laboratory in South Korea, a team of researchers has wrapped ordinary graphite, one of the most common and inexpensive materials in the energy world, in a film so thin it measures only five nanometers. The protective skin answers a stubborn problem that has long limited graphite: each charge swells and cracks its layered structure, shortening its life. Borrowed from the techniques that build computer chips, the approach hints at batteries that might charge quickly and endure for thousands of cycles, though it still must prove itself beyond the bench before it can power the vehicles and gr
POSTECH Coats Graphite With 5-Nanometer Layer, Extending Battery Life to 4,000 Fast-Charge Cycles
A coating one twenty-thousandth the width of a hair
Why does a 5-nanometer coating matter so much for a battery?
Graphite in a dual-ion battery has to take in large anions, so it swells and shrinks with every charge until it cracks. The coating holds the particles together while still letting the anions through.
What's different about how they applied it?
Earlier work coated the finished electrode. This team coated each graphite particle first, then built the electrode, so the protection reaches where the damage starts.
The headline number is 4,000 cycles. What does that actually rest on?
Lab results reported by the team in Advanced Functional Materials. Under about 12-minute fast charging, coated graphite kept performance through 4,000 cycles, and uncoated graphite didn't pass 1,000.
So that's the researchers' own testing, in a research setting. Nothing here says it's been checked independently or in a real vehicle.
Correct. The source says plainly that it's at the research stage.
And the claim that it fits existing production lines?
That's a potential the team says it confirmed, not a demonstrated factory result. Uniform coating over large electrodes is still listed as unresolved.
Cost is the same open question. Ahn said they'll keep working on lowering production costs, which suggests it isn't solved yet.
What would tell us it's working beyond the lab?
Long-term reliability data and a large-area process that holds up. The source gives no timeline for either.
The Pulse
- Graphite's cheap promise is undercut by a structure that swells and splits with every charge, quietly draining the battery's life.
- Researchers at POSTECH and Sogang University have reversed the usual order, coating individual graphite particles before the electrode is ever assembled.
- The reported results, over 4,000 fast-charge cycles against fewer than 1,000 for uncoated graphite, have turned a long-standing lifespan wall into a visible opening.
- Still confined to the research stage, the breakthrough now faces its real test: whether the nanocoating stays uniform across large-area production and holds up over years of use.
In a laboratory in South Korea, a team of researchers has wrapped ordinary graphite, one of the most common and inexpensive materials in the energy world, in a film so thin it measures only five nanometers. The protective skin answers a stubborn problem that has long limited graphite: each charge swells and cracks its layered structure, shortening its life. Borrowed from the techniques that build computer chips, the approach hints at batteries that might charge quickly and endure for thousands of cycles, though it still must prove itself beyond the bench before it can power the vehicles and grids of tomorrow.
On the 16th, POSTECH announced that a team of South Korean researchers had found a way to make graphite, one of the cheapest battery materials, charge faster and last far longer. The key is a protective film just 5 nanometers thick, roughly one twenty-thousandth the width of a human hair.
The work joined the groups of chemistry professor Park Soo-jin and mechanical engineering professor Ahn Ji-hwan at POSTECH with a team led by Ryu Jae-gun at Sogang University. Together they developed a graphite cathode for dual-ion batteries, a design that avoids costly metals like cobalt and nickel and has drawn interest for its fast charging. Its weakness has been lifespan. Larger ions squeeze between graphite's layers, the material swells and contracts with each charge, and the structure eventually cracks.
The team borrowed atomic layer deposition, a chipmaking method that builds films one atomic layer at a time. Earlier efforts coated finished electrodes, which left the interior of the particles exposed. This time the researchers coated each graphite particle with zirconium oxide before assembling the electrode, a step they say is the first use of such a precision chipmaking technique on battery powder. The film restrains swelling and collapse while leaving pathways open for ions.
In tests, the coated graphite stored more than three times as much charge in one-minute ultrafast cycles and kept its performance through 4,000 fast-charge cycles, while uncoated graphite failed before 1,000. Because the coating is applied to the powder, the team believes it could slot into existing production lines at modest cost. Park called the cheap material a new design principle, and Ahn said the work shows semiconductor technology can drive energy innovation.
The results remain experimental. Uniform coating across large electrodes and proof of long-term reliability will decide whether the idea reaches electric vehicles, grid storage, drones and beyond.
On the 16th, POSTECH announced that a team of South Korean researchers had found a way to make one of the cheapest battery materials, graphite, charge faster and last far longer. The fix is a protective film only 5 nanometers thick, about one twenty-thousandth the thickness of a human hair.
The work came from the research groups of chemistry professor Park Soo-jin and mechanical engineering professor Ahn Ji-hwan at POSTECH, together with a team led by Ryu Jae-gun, a professor of chemical and biomolecular engineering at Sogang University. They developed a graphite cathode for dual-ion batteries and published the results in the online edition of Advanced Functional Materials.
A dual-ion battery stores energy when anions from the electrolyte slip between the layers of graphite during charging. Unlike lithium-ion batteries, it does not need expensive metals such as cobalt and nickel in the cathode, and its fast charging has drawn attention as a next-generation approach. Lifespan has held it back. The anions are larger than the gaps between graphite layers, so the graphite swells and contracts with every charge. The layered structure cracks and performance drops sharply. Above 4.5V, electrolyte decomposition adds to the damage.
The team turned to atomic layer deposition, a semiconductor manufacturing technique that builds ultrathin films one layer of atoms at a time. Earlier attempts coated the surface of a finished electrode. That covered the graphite along with other components and left the interior of the particles, where protection was needed, exposed. The researchers reversed the order. They coated each graphite particle with zirconium oxide (ZrO₂) before the electrode was assembled. The team says this is the first time a precision coating method from chipmaking has been applied to battery powder materials.
According to the team, the thin film restrains the swelling and shrinking of the particles and prevents structural collapse. It also leaves paths open for anions to move, which improves charging performance.
The reported results differ sharply from conventional graphite. In ultrafast charge-discharge tests lasting about one minute, the coated graphite stored more than three times as much charge as the conventional material. Under fast charging of about 12 minutes, it kept its performance through 4,000 repeated cycles, while uncoated graphite did not get past 1,000.
Because the coating goes on the powder before electrode manufacturing, the team says the method could be integrated relatively easily into existing battery production lines. Using less expensive metal also leaves room for cost reductions. Park said the cheap graphite offers a new design principle for batteries that charge quickly and last long. Ahn said the work shows semiconductor technology can be a key tool for next-generation energy innovation, and that the group will keep working to lower production costs.
The study was supported by the National Research Foundation of Korea, the Ministry of Science and ICT's Core Research Equipment Development Project (Korea Institute for Advancement of Technology), the Ministry of Education's Basic Research Program, and the Toray Science Foundation of Korea. Alongside Park, Ahn and Ryu's team, Kang Ji-eun (Ph.D.), Ji Yun-a (master's) and Cho Seong-eun (doctoral student) took part.
The results remain at the research stage. Industry watchers cite two keys to commercialization: keeping the nanocoating uniform across large-area electrode production, and verifying long-term reliability. If those hold, the team sees uses in urban ultra-fast mobility, renewable-linked grid storage, urban air mobility, drones and industrial robots. It also raises the possibility of applying the coating to other cathode and anode materials, fuel cells and water electrolysis catalysts.
Notable Quotes
The cheap graphite will serve as a new design principle for making batteries that charge quickly and last a long time.— Park Soo-jin, POSTECH chemistry professor
Semiconductor technology can become a key tool for next-generation energy innovation; the team will keep working to lower production costs.— Ahn Ji-hwan, POSTECH mechanical engineering professor