In the long lineage of machines built to hold a camera steady and move it with intent, Motorized Precision has offered a first glimpse of its newest flagship, the KIRA GEN 3, a decade after the original arrived. The teaser speaks in numbers and specifications: a heavy payload, a fast top speed, and a base that gathers power and control into one body. Yet much remains unsaid, from how the touch sensors will behave to when the machine will be available and at what final price. For now it stands as a promise drawn in outline, waiting for the company to complete the picture.
Motorized Precision Teases KIRA GEN 3, a 30 kg Flagship Camera Robot Expected Near $120,000
A third generation arriving after a decade of the KIRA line
Mark
So what is actually new here? It's a camera robot, and the company already makes them.
Mimi
It's the third generation of the KIRA line, and the big change is the integrated base. Power system and controller sit inside it, so it's one unit instead of a robot plus separate boxes.
Mark
And the specs?
Mimi
30 kg payload, 6 m/s speed, 1800 mm reach, single-phase 220V. About 485 pounds with the base and robot together.
Luke
Worth saying those are the company's teased figures. This is a tease, not a full launch, and nothing here has been independently tested.
Mark
What about the touch sensors on each joint?
Mimi
That's listed as an advanced feature. It suggests the arm can sense contact, but the teaser doesn't say what the sensors do.
Luke
Right, and that's a gap. I'd be careful about reading safety behavior into a bare line item.
Mark
Why does removable legs matter?
Mimi
At that weight, it's about moving the rig between locations. It's a travel feature, a practical one.
Luke
And the $120,000? That's an expected figure, not a price. Pricing isn't finalized, and there's no release date either.
Mark
So the thing to watch is the official announcement.
Mimi
Yes. Confirmed price and availability are what turn this from a teaser into a product.
The Pulse
- A teased flagship robot arrives with headline figures that promise serious power: a 30 kg payload and 6 m/s speed.
- The machine's integrated base, carrying power and control together, aims to replace a tangle of separate boxes with one streamlined unit.
- Its roughly 485-pound combined weight and removable legs signal a tension between heavy capability and the need to travel between sets.
- Pricing near $120,000 remains an estimate, and no release date has been set, so the story is still waiting for official confirmation.
In the long lineage of machines built to hold a camera steady and move it with intent, Motorized Precision has offered a first glimpse of its newest flagship, the KIRA GEN 3, a decade after the original arrived. The teaser speaks in numbers and specifications: a heavy payload, a fast top speed, and a base that gathers power and control into one body. Yet much remains unsaid, from how the touch sensors will behave to when the machine will be available and at what final price. For now it stands as a promise drawn in outline, waiting for the company to complete the picture.
Motorized Precision has given its first look at the KIRA GEN 3, the newest camera robot in its line and the company's flagship. The teaser arrived as a short list of specifications rather than a full launch, reported by Newsshooter.
The headline numbers are a 30 kg payload, about 66 pounds, and a top speed of 6 meters per second, with an arm reach of 1800 mm. It runs on single-phase 220V power, which matters for anyone hoping to operate a machine this size from ordinary supply.
The design centers on a fully integrated base that houses the power system and controller, so the robot comes together as one streamlined unit. Its combined weight with the base is roughly 485 pounds, and the legs detach for travel between locations. Each joint carries touch sensors, though how they work remains unexplained.
Pricing is not finalized. The expected figure is around $120,000 USD, but that is only an expectation. For now, the story is a specification sheet and a price estimate, with an official release and availability date still to come.
Motorized Precision has given the first look at the KIRA GEN 3, the newest model in its line of camera robots and the one the company is calling its flagship. The tease was reported on Newsshooter, and it came with a short list of specifications rather than a full product launch.
The headline numbers are a 30 kg payload, which is about 66 pounds, and a top speed of 6 meters per second. The arm's reach is listed at 1800 mm. It runs on single-phase 220V power, a detail that matters for anyone planning to run a robot of this size from ordinary supply rather than heavier electrical service.
The design centers on a fully integrated base. The power system and the controller both live inside it, so the setup comes together as a single streamlined unit rather than a robot with separate boxes attached. The base includes power distribution and quiet fans. A sliding tray inside it gives easy access to the controller. The combined weight of base and robot is roughly 485 pounds.
Two other features speak to how the machine is meant to be used. The legs are removable for travel, which is a practical concession for a rig this heavy that has to move between sets and locations. And each joint carries advanced touch sensors, though the teaser does not spell out how they work or what behavior they trigger.
The KIRA GEN 3 is the latest iteration of the KIRA series, and the lineage is long. The original KIRA was announced more than 10 years ago, which makes this a third generation arriving after a decade of the product line.
Pricing has not been finalized. The expected figure is around $120,000 USD, but that is an expectation, not a published price. The teaser does not give a release date or availability details.
For now, what exists is a specification sheet and a price estimate. The next thing to watch for is an official release announcement from Motorized Precision, with confirmed pricing and a date for when the robot can actually be bought or rented.
Notable Quotes
Pricing hasn't been finalized, but it is expected to cost around $120,000 USD.— Newsshooter, reporting on the Motorized Precision teaser
Want the full story?
Read the original at Newsshooter ↗
Technology